[Guide] How to manually renew NovaStor DataCenter 8 Command Server SSL certificate for Windows (Video)
Watch the video on YouTube in at least 1080p (direct link: https://youtu.be/JDkKHsoAK34):
Note: There are video timestamps to utilize to go to a specific area of the video if you load the full YouTube video via the above direct link and then expand the [Description] to see the timestamps.
Description of the video:
How to manually renew the NovaStor DataCenter 8.x Command Server SSL certificate for Windows. This guide was written specifically for DataCenter 8.2.13 and newer versions, but is applicable to any version of DataCenter 8.x. The difference being that DataCenter 8.0.x versions provide a 90 day SSL certificate validity, 8.1.x versions provide a 1 year SSL certificate validity, and 8.2.13 and newer versions provide a 5 year SSL certificate validity. There will be slight differences in the names and descriptions of the services on the Command Server system as seen in the video. Otherwise these instructions are applicable to all DataCenter 8.x versions. At the mark in the video it covers dealing with the GUI (Java GUI, otherwise known as the DC Management Console) installed on a separate system, separate from the Command Server system, and in that case the GUI is not able to login due to the expired SSL certificate on the Command Server, it verifies the current date and the SSL cert and if it is expired it will not allow login from the GUI app installed on that separate system. In that case the GUI has to be installed over top of the existing, the version of the GUI has to match the Command Server version, and it will prompt to browse to the SSL certificate (.cer file) which is located on the Command Server. After renewing the SSL certificate on the Command Server using the instructions in the video, you would then be required to browse to the new SSL certificate.cer file on the Command Server in C:\Program Files\NovaStor\DataCenter\etc\ folder, it will be the only .cer file there, and copy it to the separate system, and select that file when you are prompted by the GUI installer to select the SSL certificate (.cer) file. The written knowledge base article 'Manually renew the NovaStor DC Command Server SSL certificate, which is installed on the Command Server 8.2.13 and newer versions for Windows' is here: https://support.novastor.com/hc/en-us... The written knowledge base article for the Linux equivalent of these instructions titled 'Manually renew NovaStor DC Command Server SSL certificate on Command Server 8.0.x for Linux' is here: https://support.novastor.com/hc/en-us...
Please follow along with the video by reading the written KB article here: https://support.novastor.com/hc/en-us/articles/360017922957-Manually-renew-the-NovaStor-DC-Command-Server-SSL-certificate-which-is-installed-on-the-Command-Server-8-2-13-and-newer-versions-for-Windows. This guide was written for DataCenter 8.2.13 and newer, but is still applicable to any version of 8.x.
The direct link to the video on YouTube is: https://youtu.be/JDkKHsoAK34
Note: When viewing the video in full screen mode, you will need to change the resolution manually to 1080p at minimum by clicking the "Gear" icon at the bottom right of screen. If you do not change the resolution you may experience loss of clarity. 1440p (2560×1440) was the native resolution that this video was recorded in and YouTube sometimes does not auto-detect the resolution properly as to display it in HD.